Brush seals, weather seals, energy saving dock leveler seal, door  seals. Brush seal, weatherstripping, rolling steel doors, sectional overhead doors


BRUSH DOOR SEALS
  Brush Door Seal Products
Brush Door Seals
 Weather Seals
 Weatherstripping
 Pedestrian Doors
 Double Doors
Hollow Metal Doors
Double Hollow Metal Doors
Dock Levelers
Sectional Overhead Doors
Rolling Steel Doors
Swing Doors
 Aircraft Hangar Doors

BRUSH MOUNTINGS
 Brush Mountings
Angled Brush Mountings
Right Angled Brush Mountings
Reverse Angled Brush Mountings
Straight Brush Mountings

DOOR SEALS INFO
 PEST CONTROL
 Non Chemical Pest Control
Air Flow Control
Dust Control
Light Control
Sound Control
Nylon Brush Seals
Door Seals
Weatherstripping

BRUSH DESIGN SPECS
 Single Doors
Double Doors
 Hollow Metal Doors
Sectional Overhead Doors
Rolling Steel Doors
Dock Levelers

CONTACT MEMTECH
 Phone: 1-800-634-4471
Fax: 1-800-634-4472
 

 
Brush Door Seals Weatherstripping Weather Seals


use this form for DOUBLE DOORS ONLY

please take a couple of minutes to learn what information is needed
and how to take the DOUBLE DOOR survey

GAPS & MEASUREMENTS
You'll need to take these five basic measurements:
1. The gap space 3" from the tops of the doors.
2. The gap space 3" from the bottoms of the doors.
3. The width in inches of the doors inside the door jamb.
4. The height in inches of the doors inside the door jamb.
5.The gap space along the bottom of the door. 

DOOR JAMB SPECIFICATIONS
Look at the hinge sides of double doors to see the width of the door stop.  Usually there are three widths.

THRESHOLD STYLE
Indicate if threshold style is smooth or grooved and the width of threshold.

Double Entry Doors
Double Entry Doors

Double Entry Doors

Simply take the measurements required, affix a sticker to an inside edge of the door, and put the information in the spaces provided on this form

Fields marked * are mandatory

* Double doors with a center mullion should be treated as two single doors.

Door Number
Location
Did you affix an identification sticker to the inside edge of the door? Yes No
GAPS & MEASUREMENTS  
1. The gap space between the doors, 3" from the tops of the doors is: inches
2. The gap space between the doors, 3" from he bottoms of the doors is: inches
3. The combined width of the doors inside the door jamb is: inches
4. The height of the doors inside the door jamb is: inches
5. The gap space at the bottom of the door is: inches
DOOR MATERIAL & COLOR
Check appropriate box.		  
Aluminum-Anodized Matte
Aluminum-Anodized Brown
Aluminum-other color
Stainless steel
Other material
Other material - specify
Don't know
LOCK POSITION
Check appropriate box(es)		  
Top of door
Middle of door
Bottom of door
DOOR JAMB SPECIFICATIONS  
Which type of door stop is used:
(See illustration above)		 A B
  C Other
If Other please describe
THRESHOLD INFORMATION
Is the threshold:		  
Smooth
Grooved
Wider than the door
Narrower than the door
Same size as the door
GENERAL INFORMATION
Check and answer below:		  
Is door warped? Yes No
Are there door alarms? Yes No
Does the door closure work? Yes No
Do doors close tightly? Yes No
Do the doors close evenly? Yes No
Panic Bar? Yes No
Offset hinge? Yes No
Pivot hinge? Yes No
Electronic opener? Yes No
NOTES  
Please note and describe any unusual characteristics of the doors or door frames which may effect installation of the Memtech Brush Seal System.

 
Survey Taken By
Company Name
Location
Address
Address (cont.)
City
State
Zip / Postal Code
Country
Phone / Ext. *
Fax
Email *