use this form for DOCK LEVELERS ONLY
please take a couple of minutes to learn what information is needed
and how to take the DOCK LEVELER survey
AN END TO INFESTATION AND
|The food industry knows:
- The most vulnerable
entry-points in a sanitation-sensitive building are its shipping
dock leveler gaps.
- Only Memtech Nylon Brush
Seals * can fully and permanently block these openings while
maintaining full flexibility.
- Bugs, rodents or flies
entering the lower gap cannot get past the side and back seals into
your building (neither can dust, fumes or energy-robbing outside
This is how Memtech Brush
Seals secure a shipping dock from infestation and infiltration:
When you install a Memtech
Nylon Brush Seal Kit on your dock leveler, a constant barrier is
maintained over all exposed gaps, no matter how uneven the surfaces
involved. The rear gap (left), inside the door, is sealed at any
level. The side gaps in and outside the door (right) are similarly
closed to entry by constant application of the nylon brush material.
The overhead door is sealed as shown.
*Our type 6 nylon brush seals
are recommended for food processing and handling facilities. They
are U.L. Rated as "Gasketing Material for Fire Doors" (viable
from -100ºF to =350ºF). This product is made in many sizes and
shapes to secure nearly any building entry-point and your energy savings
alone will likely repay your investment in one season!
For more information on
Memtech Nylon Brush Seals click here
DOCK LEVELER SURVEY
First, note which one of the drawings above describe the layout of your
dock leveler layout (A, B, C or D), and measure width of gap between the
dock leveler at the back
Ask the manager: is the dock
leveler used for below dock floor truck loading? Yes or No.
complete the form below
All measurements are in inches.
* are mandatory