Sliding Door Seals

Sliding Door Brush Seals

Door Seals and Weatherstripping for Sliding Doors

Sliding Door Brush Seals Memtech Brush door seals and weatherstripping provide an extremely effective way of preventing heat loss, providing non-chemical pest control, and dust control around sliding doors. Sliding doors used on barns, warehouses, and metal buildings are notoriously difficult to seal along the sides, top, and bottom due to uneven surfaces and wide gaps.

Brush seals are the only sealing solution capable of maintaining consistent contact across irregular surfaces commonly found on sliding doors. In over 30 years of service, we have never known a Memtech brush door seal to wear out under normal conditions. Once installed, you can seal it and forget it—unlike vinyl door seals that deteriorate over time due to heat, cold, and exposure.

We will be happy to design and quote a custom brush seal solution for your single or double sliding door application.

Single Sliding Door Seals Download PDF Double Sliding Door Seals Download PDF

Request Sliding Door Quote

FILL OUT THE FORM BELOW TO REQUEST A QUOTE:

Special Note: If you have multiple door types and/or sizes that need to be sealed, please fill out the form below or click to call one of our engineers at 800.634.4471 to solve all your brush seal issues.

Please provide the following information for SINGLE sliding doors:

Door

Please select the quantity of Sliding Doors (required)

(Qty)

2. Width of the frame of the door(s): (inches)
(inches)

3. Height of the frame door(s):
(inches)

4. Top seal is mounted to the lintel or frame of the door. Usually it is sealed with a straight, angled or reverse angled mounting extrusion:

What angle bracket would work better for your door(s)? (straight or angled)
On the inside what is the gap at the top between the frame edge and the door’s farthest surface?
(inches)

5. Side seal can be mounted to the outside frame or the edge of the door. On the outside what is the gap on the sides between the frame edge and the door’s farthest surface? On the inside what is the gap at the top between the frame edge and the door’s farthest surface?
(inches)

6. Bottom Seal: What is the greatest gap between the bottom of the door and the threshold surface?
(inches)

What angle bracket would work better for your door(s)? (straight, angled or reverse angled)

If they are DOUBLE sliding doors:

7. If double door, what is the width of the frame?
(inches)

8. Center seal is mounted to the center of each of the doors on the inside or outside. What is the greatest gap between the doors when closed?
(inches)

Your Name (required)

Your Email (required)

Your Phone Number (required)

Company

Title

Address line 1

Address line 2

City

State

Zip

Please note and describe any unusual characteristics of the doors or door frames which may affect the installation and operation of the Memtech Brush Seal System

Please feel free to attach any photos of your doors if you believe it may help to show your site conditions.
(Add a .jpg image file)

You should receive an email about your quote inquiry within 10 minutes after pressing send, and if not, please email us again or call 800.634.4471 to talk with one of our service technicians about all of your brush seal needs.