Rolling Steel Door Brush Seals

Door Seals for Rolling Steel Doors, Overhead Doors, and Self Storage Doors

Rolling Steel Door Brush Seals border=
Request A Brush Seal Quote
download and print Rolling Steel Door Brush Seals (PDF)

Rolling Steel Doors are the most common industrial overhead door for either small garage doors or self storage doors. Our brush door seals do a most uncommon job of sealing steel roll up doors. As an example, unlike vinyl, brush will not wear out or deteriorate. Truth is, that no other brush seal material can seal the sides of a roll up door (see photo). Only the flexibility of brush allows a complete seal on the roll up door corrugations (inside). When sealed on all four sides (and dock leveler if needed), nothing gets through a rolling steel door brush seal; Insects, rodents and even air are forever blocked from entering your building. If sealed for food safety, you get energy savings for free. If done for air blockage, you get pest control free. What a deal! Secure your overhead doors with a brush seal and conserve on energy, utilize as a non- chemical pest control solution, and  gain all of the benefits of being a dependable self storage seal all-in-one.

Rolling Steel doors, or also known as self-storage doors, are made up of slats of steel. They are different from the rolling steel curtain (sheet) doors that are made up of one sheet of corrugated steel.Please see Rolling Steel Curtain Door Brush Seals if you need to seal this type of door.

We will be happy to design and quote you a brush seal solution for your Rolling Steel Doors.

Brush door seals for rolling steel doors

Memtech brush door seals and weather strip permanently block entry for bugs, insects, and other pests without chemicals around rolling steel doors. Use our brush door seal as a barrier to control lying and crawling insects and small animals. Memtech brush door seals have raised an AIB by 90 points!


FILL OUT THE FORM BELOW TO REQUEST A QUOTE:

Please provide the following information for a quote

Quantity of Rolling Steel Doors (required)

(Qty)

 

Door #1

Width of the frame of the single door:
(Inches)

Height of the frame of the single door:
(Inches)

Top Seal - On the outside what is the gap at the top between the frame edge and the door’s farthest surface:

(Inches)


Side Seal Options

Side Seal Option 1 – Side seal can be mounted to the outside frame if the gap is less than about 3” to the door. On the outside what is the gap on the sides between the frame edge and the door’s farthest surface:

(Inches)

Side Seal Option 2 – Side seal can be mounted to the inside track if the gap is too large on the outside door. On the inside what is the gap on the between the track surface and the door’s farthest surface:

(Inches)


Bottom Seal Options

Bottom Seal Option 1 – Bottom seal is mounted to the bottom of the door on the inside or outside if there is NO ledge at the bottom. What is the greatest gap between the bottom of the door and the threshold surface:

(Inches)

Bottom Seal Option 2 – Bottom seal is mounted to the bottom of the door outside if there is a ledge at the bottom. What is the greatest gap between the bottom of the door and the threshold surface:

(Inches)


Door #2

Width of the frame of the single door:
(Inches)

Height of the frame of the single door:
Inches

Top Seal - On the outside what is the gap at the top between the frame edge and the door’s farthest surface:

(Inches)


Side Seal Options

Side Seal Option 1 – Side seal can be mounted to the outside frame if the gap is less than about 3” to the door. On the outside what is the gap on the sides between the frame edge and the door’s farthest surface:

(Inches)

Side Seal Option 2 – Side seal can be mounted to the inside track if the gap is too large on the outside door. On the inside what is the gap on the between the track surface and the door’s farthest surface:

(Inches)


Bottom Seal Options

Bottom Seal Option 1 – Bottom seal is mounted to the bottom of the door on the inside or outside if there is NO ledge at the bottom. What is the greatest gap between the bottom of the door and the threshold surface:

(Inches)

Bottom Seal Option 2 – Bottom seal is mounted to the bottom of the door outside if there is a ledge at the bottom. What is the greatest gap between the bottom of the door and the threshold surface:

(Inches)


Door #3

Width of the frame of the single door:
(Inches)

Height of the frame of the single door:
(Inches)

Top Seal - On the outside what is the gap at the top between the frame edge and the door’s farthest surface:

Inches


Side Seal Options

Side Seal Option 1 – Side seal can be mounted to the outside frame if the gap is less than about 3” to the door. On the outside what is the gap on the sides between the frame edge and the door’s farthest surface:

(Inches)

Side Seal Option 2 – Side seal can be mounted to the inside track if the gap is too large on the outside door. On the inside what is the gap on the between the track surface and the door’s farthest surface:

(Inches)


Bottom Seal Options

Bottom Seal Option 1 – Bottom seal is mounted to the bottom of the door on the inside or outside if there is NO ledge at the bottom. What is the greatest gap between the bottom of the door and the threshold surface:

(Inches)

Bottom Seal Option 2 – Bottom seal is mounted to the bottom of the door outside if there is a ledge at the bottom. What is the greatest gap between the bottom of the door and the threshold surface:

(Inches)


Door #4

Width of the frame of the single door:
(Inches)

Height of the frame of the single door:
(Inches)

Top Seal - On the outside what is the gap at the top between the frame edge and the door’s farthest surface:

(Inches)


Side Seal Options

Side Seal Option 1 – Side seal can be mounted to the outside frame if the gap is less than about 3” to the door. On the outside what is the gap on the sides between the frame edge and the door’s farthest surface:

(Inches)

Side Seal Option 2 – Side seal can be mounted to the inside track if the gap is too large on the outside door. On the inside what is the gap on the between the track surface and the door’s farthest surface:

(Inches)


Bottom Seal Options

Bottom Seal Option 1 – Bottom seal is mounted to the bottom of the door on the inside or outside if there is NO ledge at the bottom. What is the greatest gap between the bottom of the door and the threshold surface:

(Inches)

Bottom Seal Option 2 – Bottom seal is mounted to the bottom of the door outside if there is a ledge at the bottom. What is the greatest gap between the bottom of the door and the threshold surface:

(Inches)


Your Name (required)

Your Email (required)

Your Phone Number (required)

Company

Title

Address line 1

Address line 2

City

State

Zip

Please note and describe any unusual characteristics of the doors or door frames which may affect the installation and operation of the Memtech Brush Seal System

Please feel free to attach any photos of your doors if you believe it may help to show your site conditions.
(Add a .jpg image file)

 

You should receive an email about your quote inquiry within 10 minutes after pressing send, and if not, please email us again.