Rolling Steel Curtain Door Brush Seals

Door Seals for Rolling Steel Curtain Doors, and Self-Storage Doors

Rolling Steel Curtain Doors, also known as Self-Storage Doors are becoming one of the most common large steel roll up doors available today. These doors are the industry standard for self-storage units, and it’ our mission to seal them properly with our wide variety of brush seals. Give Memtech Brush Door Seals & Weather Stripping a call today at 800.634.4471 or request a quote below to handle all of your rolling steel curtain door brush seal needs. It’s our honor to guide you through the process of ordering the correct size brush and brush mounting bracket for any type of door requested.

download and print Rolling Curtain Door Brush Seals (PDF)

Over Head Door Brush Seals
Over Head Door Brush Seals
Roll Up Door Brush Seals
Roll Up Door Brush Seals
Self Storage Door Seals
Self Storage Door Seals
Self Storage Seals
Self Storage Seals

 

Request A Brush Seal Quote

They are growing in popularity for industrial and commercial uses. They are a value engineered rolling door, that works well for low or light use doors. However, because of the corrugation in the sheet door, sealing the sides and tops of the doors with traditional rubber seals is not effective. Truth is, that no other material can seal the sides of a rolling steel curtain door better than self storage seal, or brush seal. Only the flexibility of brush allows a complete seal on the door’s corrugations (inside). When sealed on all four sides (and dock leveler if needed), nothing gets through a rolling steel curtain door; insects, rodents and even air are forever blocked from entering your building. If sealed for food safety, you get energy savings for free. If done for air blockage, you get pest control free. What a deal! Seal your roll up door with a non-deteriorating, non-chemical pest control, and energy saving brush seal.

These doors are different from the traditional rolling steel doors with metal slats that make up the door. Please see Rolling Steel Door Brush Seals if you need to seal this type of door.

We will be happy to design and quote you a brush seal solution for your Rolling Steel Curtain Doors.


FILL OUT THE FORM BELOW TO REQUEST A QUOTE:

Please provide the following information for a quote

Quantity of Rolling Steel Curtain Doors (required)

(Qty)

 

Door #1

Width of the frame of the door(s):
(Inches)

Height of the frame door(s):
(Inches)

Top Seal - On the outside what is the gap at the top between the frame edge and the door’s farthest surface:

(Inches)

Side Seal - On the outside what is the gap on the sides between the frame edge and the door’s farthest surface:

(Inches)

Bottom Seal - The largest gap between the bottom of the door and the ground:

(Inches)

On average are the door(s) opened more than once a day:

Door #2

Width of the frame of the door(s)
(Inches)

Height of the frame door(s):
(Inches)

Top Seal - On the outside what is the gap at the top between the frame edge and the door’s farthest surface:

(Inches)

Side Seal - On the outside what is the gap on the sides between the frame edge and the door’s farthest surface:

(Inches)

Bottom Seal - The largest gap between the bottom of the door and the ground:

(Inches)

On average are the door(s) opened more than once a day:

Door #3

Width of the frame of the door(s)
(Inches)

Height of the frame door(s):
(Inches)

Top Seal - On the outside what is the gap at the top between the frame edge and the door’s farthest surface:

(Inches)

Side Seal - On the outside what is the gap on the sides between the frame edge and the door’s farthest surface:

(Inches)

Bottom Seal - The largest gap between the bottom of the door and the ground:

(Inches)

On average are the door(s) opened more than once a day:

Door #4

Width of the frame of the door(s)
(Inches)

Height of the frame door(s):
(Inches)

Top Seal - On the outside what is the gap at the top between the frame edge and the door’s farthest surface:

(Inches)

Side Seal - On the outside what is the gap on the sides between the frame edge and the door’s farthest surface:

(Inches)

Bottom Seal - The largest gap between the bottom of the door and the ground:

(Inches)

On average are the door(s) opened more than once a day:

 


Your Name (required)

Your Email (required)

Your Phone Number (required)

Company

Title

Address line 1

Address line 2

City

State

Zip

Please note and describe any unusual characteristics of the doors or door frames which may affect the installation and operation of the Memtech Brush Seal System

Please feel free to attach any photos of your doors if you believe it may help to show your site conditions.
(Add a .jpg image file)

 

You should receive an email about your quote inquiry within 10 minutes after pressing send, and if not, please email us again.