use this form for SINGLE HOLLOW METAL DOORS ONLY
please take a couple of minutes to learn what information is needed
and how to take the SINGLE HOLLOW METAL DOOR survey
All measurements are in
You'll need to take these three basic measurements:
1. The width of the door.
2. The height of the door..
3. The gap space at the bottom of the door
DOOR BOTTOM SPECIFICATIONS
Look at the hinge side of the door to see the width of the door
stop. Usually there are three widths as indicated by
Indicate if threshold style is smooth or grooved and the width
Simply take the measurements
required, affix a sticker to an inside edge of the door, and put the
information in the spaces provided on this form
* are mandatory
* Double doors with a
center mullion should be treated as two single doors.