Rolling Steel Door Brush Seals

Brush Door Seals and Weatherstripping for Rolling Steel Doors, Overhead Doors, and Self Storage Doors

Rolling Steel Doors are the most common industrial overhead door for either small garage doors or self-storage doors. Our brush door seals do a most uncommon job of sealing steel roll-up doors. For example, the brush will not wear out or deteriorate, unlike vinyl. The truth is that no other brush seal material can seal the sides of a roll-up door (see photo). Only the brush’s flexibility allows a complete seal on the roll-up door corrugations (inside). When sealed on all four sides (and dock leveler if needed), nothing gets through a rolling steel door brush seal; Insects, rodents, and even air are forever blocked from entering your building. If sealed for food safety, you get energy savings for free. If done for air blockage, you get pest control free. What a deal! Secure your overhead doors with a brush seal and conserve energy, utilize it as a non-chemical pest control solution, and gain all the benefits of being a reliable self-storage seal.

Request A Brush Seal Quote

Types of Rolling Steel Door Seal applications.

Rolling-Steel-Door-Brush-Seals--Memtech-Brush

Rolling Steel doors, also known as self-storage doors, are made up of steel slats. They are different from the rolling steel curtain (sheet) doors that are made up of one sheet of corrugated steel. Please see Rolling Steel Curtain Door Brush Seals if you need to seal this type of door. We will be happy to design and quote you a brush seal solution for your Rolling Steel Doors.

Memtech brush door seals permanently block entry for bugs, insects, and other pests without chemicals around rolling steel doors. Use our brush door seal as a barrier to control flying and crawling insects and small animals. Memtech brush door seals have raised an AIB by 90 points! We will be happy to design and quote you a brush seal solution for your Rolling Steel Door(s).

Why install Rolling Steel Door brush seals?

Above all, when it comes to why the installation of brush door seals is essential, it’s all about the gaps that create many issues. There are always gaps present in large rolling steel doors.
Outdoor elements are the unfortunate enemy and are a hassle to keep out unless Rolling Steel Door brush seals are installed to:

  • Prevent pests such as birds and rodents
  • Prevent debris such as dirt and dust
  • Prevent weather such as rain, wind, and snow
  • Reduce or eliminate interior temperature control from escaping
  • Preserve interior cleanliness
  • Provide privacy and light control for security purposes

Give Memtech Brush door seals & weather-stripping a call today at 800.634.4471, or request a quote below to handle all your Rolling Steel Door Seal requests. It’s our honor to guide you through the process of ordering the correct size brush door seal and brush mounting bracket for any indoor or outdoor application.

Rolling-Door-Seals

Rolling Door Seals

Overhead-Rolling-Steel-Door-Brush-Seals

Overhead Rolling Steel Door Brush Seals

Rolling-Steel-Door-Brush-Seals-6

Rolling Steel Door Brush Seals

    FILL OUT THE FORM BELOW TO REQUEST A QUOTE:

    Special Note: If you have multiple door types and/or sizes that need to be sealed, please fill out the form below or click to call one of our engineers at 800.634.4471 to solve all your brush seal issues.

     

    Please select the quantity of Rolling Steel Curtain Doors (required)

    (Qty)

     

    Door

    Width of the frame of the single door:

    (Inches)

    Height of the frame of the single door:

    (Inches)

    Top Seal - On the outside what is the gap at the top between the frame edge and the door’s farthest surface:

    (Inches)


    Side Seal Options

    Side Seal Option 1 – Side seal can be mounted to the outside frame if the gap is less than about 3” to the door. On the outside what is the gap on the sides between the frame edge and the door’s farthest surface:

    (Inches)

    Side Seal Option 2 – Side seal can be mounted to the inside track if the gap is too large on the outside door. On the inside what is the gap on the between the track surface and the door’s farthest surface:

    (Inches)


    Bottom Seal Options

    Bottom Seal Option 1 – Bottom seal is mounted to the bottom of the door on the inside or outside if there is NO ledge at the bottom. What is the greatest gap between the bottom of the door and the threshold surface:

    (Inches)

    Bottom Seal Option 2 – Bottom seal is mounted to the bottom of the door outside if there is a ledge at the bottom. What is the greatest gap between the bottom of the door and the threshold surface:

    (Inches)

     


     

    Your Name (required)

    Your Email (required)

    Your Phone Number (required)

    Company

    Title

    Address line 1

    Address line 2

    City

    State

    Zip

    Please note and describe any unusual characteristics of the doors or door frames which may affect the installation and operation of the Memtech Brush Seal System

    Please feel free to attach any photos of your doors if you believe it may help to show your site conditions.
    (Add a .jpg image file)

     

    You should receive an email about your quote inquiry within 10 minutes after pressing send, and if not, please email us again or call 800.634.4471 to talk with one of our service technicians about all of your brush seal needs.

    Shopping cart0
    There are no products in the cart!
    Continue shopping
    0