|
click on type of door below for more
detailed picture and type of mountings
click on links for
order instructions and further information
Brush door seals are the
only fully flexible air-tight door seals available for pedestrain doors,
sectional overhead doors, rolling steel doors, swing doors, double entry
doors, aircraft hangar doors and dock levelers. The technology of brush
also serves industry as a deflector on drilling or surfacing machines, a
parts and product guide and a sound or temperature blocker.
Brush door seals –
normally a nylon formulation – are looped around a central wire, crimped
into a steel channel and trimmed to size (about 1200 filaments per
inch). This assembly is normally slid into an aluminum extrusion
designed to fit a particular door or use. The brush can be cut as short
as ¼ “ or as long as 24’ and the extruded holder can be nearly any angle
to suit the task at hand.
The
extrusions holding the brush are made in several sizes to fit different
jobs.
Brush seals for:
For more information on brush seals,
weatherstripping, door seals and
weather seals email salesinfo@memtechbrush.com
|
